FloJet Bottled Water System PLUS
Model - BW4000
The newly re-designed FloJet Model BW4000 Bottled Water Dispensing System PLUS is designed to pump water from commercially available 3, 5, or 6 gallon water bottles. The system delivers the bottled water under pressure to a sink mounted drinking water faucet, or to the water inlet of a refrigerator, icemaker, coffee brewer, or Jupiter Water Ionizer.
The suction wand, when inserted into the water bottle, activates the float switch on the pump. This float switch also shuts off the system when the bottle is empty. The wand has a built in back-flow valve to prevent water from flowing back into the bottle.
The FloJet BW4000 includes:
- New, re-designed long life diaphragm pump motor
- Quiet Operation
- Universal seal cap most containers - Fits 3, 5, and 6 gallon plastic water bottles
- Suction wand and hose assembly
- Float switch for automatic shut-off when bottle is empty.
- Built-in check valve to prevent back flow
- Pump module with On/Off switch
- Thermal Overheating Protection
- Kit Fitting: Hose port/connector, compression nut and sleeve
- Quick disconnect ports
- Installation and maintenance instructions
- Compact size for easy traveling
Specifications:
- Voltage 115 Volts, 50/60 Hz. 0.3 amps
- Maximum Flow 1.09 Gallons Per Minute
- Operating pressure to - 30 PSI
- Maximum Pressure - 40 PSI
- UL and CUL listed
Dimensions
- 3.5’ cord AC power cord
- 20’ 1/4” discharge hose
- Wand is 22.2”
- Suction Hose is 48”
- Motor is 5.6”L x 5.4”W x 3” H
|

|